Specifications and options for CSA-21
Use CSA-21 as the visual reference, then confirm capacity, size, heater voltage, wood finish, glass direction, MOQ, packing, and document needs before quotation.
| Model | CSA-21 |
|---|---|
| Type | Outdoor sauna cabin |
| Use setting | Outdoor |
| Capacity | Confirm by layout |
| Wood / finish | Solid wood construction; species and finish confirmed from project requirements |
| Heater | Steam heater route; voltage and power confirmed by room volume |
| Glass | Door and glass layout matched to model |
Use CSA-021 as the visual model reference. Final size, bench layout, heater, glass, voltage, packing, and document route are locked after the approved drawing.
Product views
Send us this model code
CSA-21 | bennett@csauna.com | WhatsApp / Phone: +86 180 7047 6405
Buyer-file detail
CSA-21 additional production checks
CSA-21 should include a final note on whether the buyer wants a dry sauna experience or a higher-humidity stone-water routine.
The drawing should mark heater side, bench side, air inlet, air outlet, door swing, and roof runoff direction before approval.
If the buyer is a garden dealer, the sample should show simple owner-facing care steps instead of only factory inspection terms.
If the buyer is a resort, the file should name the operator who checks heater stones, door seal, and wood surface after opening.
Outdoor electrical routing should avoid rain-facing sides and should be photographed before the wall is closed.
A cedar option should include origin or supplier evidence when the buyer is paying for a premium wood route.
A spruce or pine route should include stronger coating and maintenance notes because those woods need clearer outdoor care.
The quote should not combine roof, heater, glass, manual, and spare parts into one unclear upgrade line.
A repeat order should freeze the same roof cover, heater route, bench layout, and accessory pack used on the approved sample.
The final handoff should let a buyer match CSA-21 across product page, RFQ, drawing, packing list, and loaded container photos.
Model-specific drawing review
Drawing checks for CSA-21
The reference shows a timber sauna, covered side deck, and round hot tub sharing one garden structure. The quotation must state which parts belong to the supplied sauna package.
- Sauna and hot-tub scope
- Confirm whether the round hot tub, side deck, posts, and canopy are supplied items or site references. Record the clear service gap between the sauna wall and tub.
- Front opening
- Lock the full-height door and window widths, door swing, handle side, bench line behind the glass, and the required privacy level.
- Roof and outdoor base
- Confirm the single-slope roof fall, rain edge, canopy projection, timber coating, deck drainage, anchoring points, and buyer-prepared foundation.
- Heating and order file
- Record heater or stove route, market voltage, heater clearance, ventilation, final footprint, packing split, label language, and inspection-photo list before drawing release.