Specifications and options for CSA-03
Use CSA-03 as the visual reference, then confirm capacity, size, heater voltage, wood finish, glass direction, MOQ, packing, and document needs before quotation.
| Model | CSA-03 |
|---|---|
| Type | Cube sauna |
| Use setting | Outdoor |
| Capacity | 4 person |
| Wood / finish | Cedar or cedar-style finish |
| Heater | Wood stove / flue planning |
| Glass | Glass door or front glass option |
Use CSA-03 as the visual model reference. Final size, bench layout, heater, glass, voltage, packing, and document route are locked after the approved drawing.
Product views
Send us this model code
CSA-03 | bennett@csauna.com | WhatsApp / Phone: +86 180 7047 6405
Model-specific review
CSA-03 buyer, production, and RFQ checks
CSA-03 adds sliding glass to a cedar cube, so rail alignment becomes a production checkpoint.
The sliding door should be tested before packing because small track errors are obvious to showroom buyers.
Glass crate protection should be stronger than a normal hinged-door cabin because the rail and panel travel together.
Cedar boards around the opening should be inspected for straightness before the track is fixed.
A buyer using this model for a showroom should approve handle style and rail color with the front image.
Heater placement should not interfere with the sliding entry path or the seated clearance near the door.
For European orders, controller language and label placement should be confirmed with the voltage route.
For North American orders, the buyer should confirm hardwire expectation before production photographs are taken.
The packing list should separate sliding rail parts, glass panel, handle set, heater carton, stones, and manuals.
A repeat SKU should freeze the same glass width and rail hardware because after-sales parts depend on them.
The factory file should show the door both open and closed so the buyer can check usable entry width.
CSA-03 should not be described as a normal cube sauna because the sliding system changes service responsibility.
The RFQ should ask whether the buyer wants showroom display, villa use, or dealer catalog use.
The final quote should mention replacement rail and glass support if the buyer plans multiple locations.
Design department notes
CSA-03 buyer checks before drawing confirmation
These notes are recorded by our design department before quotation and drawing approval, so the selected model stays clear for sales, production, packing, and buyer handoff.
| Sliding door planning | This model needs early confirmation of sliding-door direction, glass thickness, handle position, and transport protection, because those items affect both drawing and packing. |
|---|---|
| Wood-fired or electric route | If the project keeps a wood-stove direction, chimney exit, heat shield, floor protection, and local installation responsibility should be separated from the sauna body quote. |
| Quote file | Send door direction, stove or electric heater preference, destination compliance needs, spare glass or hardware requirements, and whether the room is for private label display. |