Model details to confirm
Use CSA-04 as the visual reference, then confirm capacity, size, heater voltage, wood finish, glass direction, MOQ, packing, and document needs before quotation.
| Model | CSA-04 |
|---|---|
| Type | Outdoor sauna cabin |
| Use setting | Outdoor |
| Capacity | Confirm by layout |
| Wood / finish | Cedar or cedar-style finish |
| Heater | Heater selected for destination market |
| Glass | Door and glass layout matched to model |
Use CSA-04 as the visual model reference. Final size, bench layout, heater, glass, voltage, packing, and document route are locked after the approved drawing.
Product views
Send us this model code
CSA-04 | bennett@csauna.com | WhatsApp / Phone: +86 180 7047 6405
Product specification notes
CSA-4 factory review points
This page is kept as a buyer-facing model reference. Before production, CSauna confirms material, voltage, heater route, glass, bench layout, MOQ, packaging, certificate needs, and RFQ notes against the final drawing and order file.
| Model role | cedar outdoor sauna room |
|---|---|
| Buyer fit | buyers that need a clean cedar outdoor room as a baseline project model |
| Material route | cedar grade, board width, exterior coating, and roof edge should be fixed before the buyer compares it with lower-cost hemlock or pine options |
| Voltage / heater | quote electric heater, stove preparation, or heater-by-market separately so the RFQ does not mix different heat routes |
| MOQ direction | 1 set can be used for sample confirmation; repeat MOQ should be confirmed after material, heater, glass, packaging, and label decisions are locked. |
| Packing scope | Confirm shell size, heat system, glass crate, accessory cartons, manuals, labels, spare parts, and loading sequence before shipment. |
| Quote file | CSA-4 should keep size, capacity, bench direction, door swing, glass position, ventilation, certificates, packing, and RFQ notes on one handoff record. |
Design department notes
Details to confirm for CSA-4
The design team checks cedar board close-ups, heater-side clearance, door direction before the drawing is locked. These are small details, but they decide whether the buyer receives a repeatable model or only a good-looking sample.
- cedar board close-ups
- heater-side clearance
- door direction
- roof edge
- packing labels
Model-specific review
CSA-4 buyer, production, and RFQ checks
CSA-4 is a straightforward cedar outdoor room, so its value comes from stable material and clean construction.
The buyer should confirm cedar grade before comparing this model with hemlock or pine alternatives.
Door direction should be locked early because it affects heater side, bench direction, and delivery handoff.
Roof edge and exterior coating should be documented if the cabin will sit in rain or snow exposure.
If the buyer chooses an electric heater, the file should name heater kW, voltage, controller, and stone pack.
If the buyer asks for stove preparation, chimney route and heat shield should be handled as a separate scope.
Packing should show wall panels, roof parts, heater components, glass or door hardware, manuals, and labels clearly.
A distributor should receive one sample with fixed board tone before asking for a larger MOQ.
For Southeast Asia, humidity and site ventilation should be discussed before exterior maintenance is promised.
For Europe, certificate expectations should be reviewed before the buyer compares FOB price.
Factory photos should include the side wall and rear wall, not only the best front view.
The quote should keep accessory choices separate from the basic room price.
CSA-4 should remain a baseline outdoor cedar model with less visual noise and stronger procurement clarity.
The buyer file should make it easy to repeat the same room without rediscovering every detail.
Final buyer-file notes
CSA-4 should include one final outdoor-care note covering roof inspection, door seal review, and seasonal exterior finish checks.
The buyer should confirm whether this baseline cedar room will become a repeat SKU or only a one-off project model.
Spare boards and small hardware should be named separately when the destination has long replacement lead times.
The approved record should keep front, side, rear, and packed views together so future orders match the same room.
Design department notes
CSA-04 buyer checks before drawing confirmation
These notes are recorded by our design department before quotation and drawing approval, so the selected model stays clear for sales, production, packing, and buyer handoff.
| Outdoor cedar room scope | Use this reference when the buyer wants a practical cedar outdoor sauna room rather than a highly glazed display model. Wall thickness, roof protection, and bench layout matter most. |
|---|---|
| Climate check | For colder or wetter markets, our design team checks roof covering, exterior coating, floor support, ventilation, and door sealing before confirming the production drawing. |
| Quote file | Send site climate, target capacity, voltage route, heater position, preferred cedar tone, packaging limits, and any dealer label or manual requirements. |