Dimension planning

How to prepare sauna room dimensions before drawings

Sauna dimensions should be discussed as a working file, not as a decorative sketch. Before a drawing is locked, our design department checks exterior size, clear interior space, bench levels, glass direction, door swing, heater clearance, wall thickness, and packing limits.

Review model pages Check wood and options Ask for worksheet

Core dimension fields

Field	Typical buyer input	Factory check
Exterior width x depth x height	Available room footprint or outdoor slab size.	Wall thickness, roof overhang, door opening, and packing size.
Capacity	1-2, 2-3, 3-4, 4-6, or commercial use.	Bench length, sitting depth, heater power, and ventilation path.
Bench layout	Single level, L bench, upper/lower bench, or removable bench.	Clear sitting height, leg space, and service access.
Glass and door	Front glass, side window, panoramic glass, or privacy wall.	Tempered glass size, frame support, hinge/sliding direction, and crate protection.

Buyer measurements to send

Site or room width, depth, ceiling height, and any wall obstruction.
Preferred capacity and whether users sit, lie down, or rotate in groups.
Indoor or outdoor use, roof exposure, drainage condition, and floor surface.
Preferred heater type, voltage market, and controller position.
Door direction, glass privacy needs, and access route for delivery.

Common sizing mistakes

Choosing exterior size without checking interior bench comfort.
Using a tall heater specification while keeping a low ceiling.
Forgetting roof thickness and crate size when planning container loading.
Adding full glass after the first quote without recalculating frame and packing.

Dimension review table

Review point	Good practice	Risk if skipped
Bench comfort	Check sitting width and bench depth against the target capacity.	The room looks large outside but feels cramped inside.
Heater clearance	Confirm distance from heater to bench, glass, and wood wall.	Installation may fail local safety review.
Packing limit	Confirm max crate length and loading method.	Extra freight or unloading difficulty.
Drawing lock	Freeze door, glass, heater, bench, and wall positions before production.	Late revision causes delay and mismatch in manuals.

Dimension file example for custom sauna rooms

A dimension request should read like a small project file. The factory can then check proportion, heater clearance, bench comfort, and packing without guessing from a photo.

Send a simple top-view sketch even if it is not a professional drawing.
Mark door direction, glass side, heater position, and preferred bench wall.
Include ceiling height and any wall obstruction or floor drain.
For commercial rooms, include expected user volume and cleaning access needs.

Buyer field	What to record	Reason
Room envelope	Exterior W x D x H and usable interior target.	Separates visual size from usable comfort.
People and use	Target capacity, sitting or lying use, commercial or home.	Controls bench and heater route.
Site condition	Indoor/outdoor, slab, floor, wall, ceiling, access route.	Affects installation and packing.
Locked items	Door, glass, heater, bench, vent, control position.	Prevents late drawing changes.

Why dimensions should stay connected to the buyer file

Dimensions are not a standalone number. They connect to capacity, bench comfort, heater clearance, door swing, glass support, roof thickness, packing size, and installation access. If any of these fields changes, the dimension file should be updated so the quote, drawing, production note, and final handoff stay consistent.